CodeReader8 CST OBDII EOBD Code Read Scanner
Outline of CodeReader8
-- Move cursor up or down for selection
LEFT/ RIGHT BUTTONs
-- Move cursor left or right for selection; Also turn pageup or down when more than one page is displayed
--Trouble Shooting information
-- Returns to previous menu
-- Confirms a selection (or action) from a menu list
Cable with OBD II CONNECTOR
-- Connects the CodeReader8 to the vehicle¡¯s Data Link Connector (DLC)
-- Indicates test results
LED INDICATOR LAMP
-- No DTC; when there are no DTC, the green indicator lamp will light up
-- Permanent DTC; when there are Permanent DTC,the red indicator lamp will light up
LED INDICATOR LAMP
-- Confirmed DTC; when it displays¡° Confirmed DTC¡±,the red indicator lamp will light up
-- Pending DTC; when it not sure or unknown DTC, the yellow indicator lamp will light up
1. On-Board Diagnostics (OBDII )
The OBD II system is designed to monitor emission control systems and key engine components by performing either continuous or periodic tests of specific
components and vehicle conditions. When a problem is detected, the OBD II system turns on a warning lamp (MIL) on the vehicle instrument panel to alert the driver typically by the phrase of ¡°Check Engine¡± or ¡°Service Engine Soon¡±. The system will also store important information about the detected malfunction so that a malfunction can accurately find and fix the problem. Here below follow three pieces of such valuable information:
1) Whether the Malfunction Indicator Light (MIL) is commanded'on' or 'off ';
2) Which, if any, Diagnostic Trouble Codes (DTCs) are stored;
3) Readiness Monitor status.
2. Diagnostic Trouble Codes (DTCs)
OBD II Diagnostic Trouble Codes are codes that are stored by the on-board computer diagnostic system in response toa problem found in the vehicle. These codes identify a particular problem area and are intended to provide you with a guide as to where a fault might be occurring within a vehicle.OBDII Diagnostic Trouble Codes consist of a five-digit alphanumeric code.The first character, a letter, identifies which control system sets the code.The second character, a number,0-3;other three characters, a hex character,0-9 or A-F provide additional information on where the DTC originated and the operating conditions that caused it to set. Here below is an example to illustrate the structure of the digits:
A key type diagnostic function.
Read dynamic data flow
Ready condition test.
Query Freeze data.
Read the current fault code
Erase the fault code.
Oxygen sensor detection test
Specific monitoring system test ,vehicle monitoring
Read pending fault code
Read the vehicle-mounted system or components of the control.
Read vehicle information.
Read permanent fault code.
Fault code search function.
Test data playback.
Vehicle fuel consumption test
Vehicle acceleration test.
Technical parameter :
Screen: 3.2,320*240 colorful LCD screen.
Input voltage range: 9 ~ 18V
Working current: typical value<100mA 12V
Wiring Connected way: standard 16pin diagnostic port.
Working temperature: 0 ℃ ~ 50 ℃
Storage temperature:-20 ℃ ~ 70 ℃ @ RH 60%
1pc *CodeReader8 main unit
1pc *USB cable
1pc *6 feet OBDII connected cable
You may also be interested in the following product(s)