Auto Current and Electric Voltage Tester Car Multimeter Auto Fault Detector
This Tester with a displa can be used to test current and electric road trouble shooting rapidly and accurately in car fuse box.
it is directly inserted into the car fuse plate.
It can work on cars and commercial models.
Range: 0.1 A 19.9 A
Maximum load: 20 A / 48 v DC, maximum continuous time 10 seconds
Fuse type: medium plug type fuse
Working temperature: 0-40 storage
Temperature: 10 to 50
Voltage test measurement
Range: 1-48 v
note: when the test voltage is less than 1 v, LCD screen will display Err
1, Turn off car ignition, take off measuring circuit of the fuse, it will be put into the tester of the fuse jack, which can ensure the protection of circuit is in the correct level.
2, insert tester to fuse socket.
3, if you need, please start the car ignition, in order to make the circuit to be tested in a charged state, switch the tester power supply .
4, make measuring circuit in the working state, tester screen will display the measured current value